You must enter the exact WiFi name (case- and character-sensitive) SSID: This is the same as your Wi-Fi network name.Enter SSID, *Security, and Security Key for the network you’re trying to connect the printer to:.
Select “OK” to change the password or select “cancel” to not change the password. The following message will be displayed when using the default password. Please type the following and click on “Log In”: The default login and password: The device will prompt you for authentication. If the main menu is not listed, click on the menu icon displayed in the upper left corner of the window. Locate the main menu on the left side and click on “Login.” Chrome or Safari) and type “192.168.10.1” into the address bar to access the TSP100III Network Utility. NOTE: It will take some time (about 1 minute) until the connection is confirmed. The SSID is displayed when connected and a check is marked on the screen. NOTE: When connecting to the printer, you cannot connect to the internet. TSP100IIIW-XXXXXX) from the device list displayed on the very bottom.Ī message will appear indicating that an internet connection cannot be made is displayed tap “Join Anyways.” Note: The SSID is “TSP100III-XXXXXX” (XXXXX indicated the last 6 digits of the MAC address) Let go of the feed button once it starts to print. This is accomplished by pressing the feed button while turning the power on. The firmware is listed at the top of the first page that prints.Ĭheck the MAC address of the printer. To check firmware, power on the printer while holding the feed button and let go when it starts to print. If it is lower, an iOS device is required.
Note: If the printer firmware is 1.6 or higher, an Android device can be used. The connection is disconnected.Ĭongratulations! You have successfully assigned an IP Address to the TSP100IIIW on Windows.Ĭonnecting/Setting TSP100IIIW on iOS/Android When the printer setting is completed the printer will print out a self-test page.
Supported Environments: iOS, Android, Windows 10 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 8.0 (32bit/64bit), Window 7 (32bit/64bit)
This application note shows how to manually setup the TSP100IIIW on a network and assign an IP Address with Windows, iOS and Android.